Front USB Panel
|
Now your can plug any USB cable to the front of your PC !
|
It doesn't have to be a hassle plugging USB cable to your PC each time you need to connect your digital camera, scanner, MP3 player, Palm Pilot, etc... !
|
![]() For the bonus system cooling fan to work, you need to connect it to your power supply's standard peripheral connector. The USB port will work regardless of whether the cooling fan is connected or not. |
|
![]() Plug this end to your motherboard's USB connector header. Some
motherboard needs to have the secondary USB ports to be enabled under the
CMOS BIOS. |
![]() |
![]() |
Please check your motherboard's manual to see if the USB connector on your motherboard has the same pin-out as following : |
![]() |
![]() |
![]() |
| STEP 1. Insert your USB Front Panel to an empty 5.25" bay. |
STEP 2. Fasten screws on both side of your USB Front Panel. |
Right Side View There are 18 screw holes on both side(right & left) to fit different cases. |
![]() |
![]() |
| Small Cooling Fan (View From Outside) | Small Cooling Fan (View From Inside) |